Corrosion of ferrous metals is caused by the tendency of iron (anode) to go into solution in water as ferrous hydroxide and displace hydrogen, which in turn combines with dissolved oxygen to form more water. At the same time, the dissolved ferrous hydroxide is converted by more oxygen to the insoluble ferric hydroxide, thereby allowing more iron to go into the solution. Corrosion, therefore, requires liquid water (as in damp air) and oxygen (which is normally present dissolved in the
Alloying elements can increase the resistance of steel considerably. For example, the addition of copper to structural steel A36 and A529 can about double their corrosion resistance. Other steels, such as A242 and A588, are called weathering steels because they have three to four times the resistance of A36 steel (Art. 4.40.4). Protection against corrosion takes a variety of forms:
Deaeration: If oxygen is removed from the water, corrosion stops. In hot-water heating systems, therefore, no fresh water should be added. Boiler feedwater is sometimes deaerated to retard corrosion.
- Paints: Most paints are based on oxidizing oil and a variety of pigments, of which oxides of iron, zinc sulfate, graphite, aluminum, and various hydrocarbons are a few. No one paint is best for all applications. Other paints are coatings of
asphalt and tar. The AISC ‘‘Specification for Structural Steel Buildings’’ (ASD and LRFD) states that, in general, steelwork to be concealed within a building need not be painted and that steel to be encased in concrete should not be painted. Inspections of old buildings have revealed that concealed steelwork withstands corrosion virtually to the same degree whether or not it is painted.
- Metallic: Zinc is applied by hot dipping (galvanizing) or powder (sherardizing), hot tin drip, hot aluminum dip, and electrolytic plates of tin, copper, nickel, chromium, cadmium, and zinc. A mixture of lead and tin is called terneplate. Zinc is anodic to iron and protects, even after the coating is broken, by sacrificial protection. Tin and copper are cathodic and protect as long as the coating is unbroken but may hasten corrosion by pitting and other localized action once the coating is pierced.
- Chemical: Insoluble phosphates, such as iron or zinc phosphate, are formed on the surface of the metal by treatment with phosphate solutions. These have some protective action and also form good bases for paints. Black oxide coatings are formed by treating the surface with various strong salt solutions. These coatings are good for indoor use but have limited life outdoors. They provide a good base for rust-inhibiting oils.
As corrosion proceeds, electric currents are produced as the metal at the anode goes into the solution. If a sufficient countercurrent is produced, the metal at the anode will not dissolve. This is accomplished in various ways, such
as connecting the iron to a more active metal like magnesium (rods suspended in domestic water heaters) or connecting the part to be protected to buried scrap iron and providing an external current source such as a battery or rectified current from a power line (protection of buried pipelines).